Maxflow’s primary objective when taking over treatment of disposal well is 1 – provide adequate water clarity 2 – slow bacteria growth 3 – control pad/interface growth 4 – provide sellable skim oil off gunbarrel into oil sales tank without having to do additional treatment 5 – prevent high volume of filter sock change outs

Maxflow will batch treat tank with specialized chemicals that will cause solids to fall to bottom over a 24 hour period. Maxflow will return after 24 hours and grab oil samples from top, middle and load line of tank then run shake out to determine BS&W.

A proper running system along with effective chemical program should provide clean oil off gunbarrel into oil sales tank. Rule of thumb is to keep minimum of 2 feet of oil in gunbarrel at all times and skim anything above that. By doing this typically skim oil will be sales ready with no extra treatment

Yes it’s possible to control and slow pad growth but almost impossible to prevent it from happening. The most common type of pad/interface especially in the Permian Basin and Eagle Ford consist of iron sulfide and solid residuals from flowback and produced water. If not properly treated the combination of iron sulfides and residual suspended

Yes having large pads/interface will definitely affect your oil sales. Oil has a tendency to cling to solids so if you have pads you have oil tied up in it. It may not look like oil is trapped in interface from the surface but if you were to treat these pads and dissolve the acid

Typically industry standard is keeping free oil below 300 ppm. At Maxflow our goal is to keep it below 100 ppm and majority of our results are below 50 ppm. Keeping free oil from being pumped down well is a high priority within this company.

When a chemical program is started Maxflow expects it’s products to be effective. One of the items promised to customer is controlling pads/interface in water holding vessels. By controlling these pads/interfaces it allows gunbarrel to produce sellable skim oil, prevents oil from clinging to solids and  provide suitable water clarity. The way to gauge your

Fresh water, scale buildup, solids and tight formations are just some of the reasons well pressure increases. Maxflow provides a chemical program that prevents scale build up in pumps, pipes and perforations, as well as controlling pads/interface. While also providing chemicals preventing solids from migrating into well that has a slick water compound to allow